Sticky Pins

Sticky Pins are a simple solution to fitting your custom cut dividers in place inside the case or to each other. These pins make use of a circular tab of hook on the head and  fit into the ends of the dividers. Two or three pins on each end is sufficient to secure each divider into place and have a much cleaner finished look than hook and loop tabs of the past.

These can also be used in older Lightware MultiFormat dividers, so its possible to retrofit your old dividers to the Sticky Pins.

SP60

MSRP $19.95

Package of 60 pins and adhesive, hook dots. Works with all current and past Multi Format Dividers

Dividers for MultiFormat Cases

What sets Lightware MultiFormat Cases apart from all others is our unique divider system. It enables you to customize the case to fit your specific equipment so each piece can be nestled in a protective compartment. This means fewer equipment failures due to damage during transport and helps organize your gear.

Dividers have a rigid corrugated plastic core covered with a padded, hook and loop compatible fabric. Each set will have 3 to 5 dividers, depending on the case, that run the length and height of the case. They can then be easily cut with straight edge and utility knife to any length or height you need to create a layout that works for you and your equipment.

Once your layout is set, dividers can now be attached to the inside of the case or to each other by means of our Sticky Pins. These are pins, with a circular tab of hook on the head, that fit into the ends of the dividers. Two or three pins on each end is sufficient to secure each divider into place and your equipment is going to love it.

A1015

MSRP $73.95

Divider set for MF1015

A1217

MSRP $66.95

Divider set for MF1217

A8020

MSRP $39.95

Divider set for MF1420

AD8030

MSRP $73.95

Divider kit for MF1420

A1629

MSRP $113.95

Divider set for MF1629

Dividers for Power Kit Cases

Power Kit Dividers are simply extra dividers for our Power Kits. Use them to make another compartment in your Power Kit or opt for a size shorter so you can lay a couple of stands or soft box above the rest of your equipment. All Power Kits have the same width so the dividers are interchangeable provided you choose a size down in height from the case you are using.These particular dividers are not meant to be altered.

A1200

MSRP $31.95

Divider set for PK1200

A1400

MSRP $31.95

Divider set for PK1400